The Pure 2.5 x 10 Inch Lead Reduction Composite Carbon Block is a top of the range extruded carbon block cartridges for superior Lead Reduction which filters to 5 microns. It has a standard size small 2.5 x 10 Inch and will fit all standard 2.5 x 10 Inch filter housings.
- Lead reduction, Arsenic, Heavy metals Technology
- High Performance Coconut Shell 100%
- Great Chlorine, taste and Odor Removal
- Certified NSF/ANSI Standard 42 – WQA
- Performance tested and verified by Independent laboratory testing
- Certified by ISO 9001
It makes an excellent upgrade to your existing carbon block filters for your under-sink water filter system or reverse osmosis water filter system. The filter is particularly good for Lead filtration but also for the bad taste and odours of chlorine as well as other impurities. It will also reduce many common particulates and impurities such as fine sediment, dirt, turbidity, lime scale, rust, sand, silt, VOCs, and more.
The filter has a thick wall with a solid carbon block and provides for a very low pressure drop (0.34 PSI) for more efficient and thorough water filtration.
This 10" coconut carbon block filter is a universally compatible replacement water filter cartridge for similar 10" filter brands. If in doubt just ask!
|Model||Osmio 2.5 x 10 Inch Lead Reduction Composite Carbon Block LRC 2505-05|
|Filter Parameter||Chlorine, Sediments|
|In Depth||Dimensions: 2-7/8 in. x 9-3/4 in
Micron Rating: 5-micron nominal
C-MAX® carbon block cartridges are tested and certified by NSF International under NSF / ANSI Standard 42 for materials only.
Performance claims are supported by company test results.
Note: artridges are rated for temperatures to 165°F (74°C).
Temperature Range: 40 - 165 F
Chlorine Taste & Odor Reduction Capacity @ flow* - > 17,000 [email protected] 1.0 gpm
Lead Reduction Capacity @ flow* - 2,000 gallons @0.75 gpm
Initial @ Flow* - 2.0 psid @ 1.0 gpm
Filter Media: Extruded solid block coconut shell carbon
Max. Flow Rate: Approx. 1-2 gallons per minute (1 GPM-2 GPM)
1. Projected Chlorine taste and odor reduction capacity when tasted in accordance with NSF/ANSI42 protocol.
2. Nominal particulate rating is for >85% of a given size as determined from single - pass particle counting results.*
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or the system. Filters are designed to fit most standard household and comercial or industrial hosings. Performance claims are based on independent lab results and manufacturer’s internal test data. Actual results obtained will vary with various combinations of organic contaminants, changes in pH or other conditions encountered in actual use. All information presented here is based on data believed to be reliable. It is offered for evaluation and verification, but is not to be considered a warranty of any kind. Flush new cartridges untill water runs clear prior to use.