✔ Filter reduces chlorine, taste and odour and limescale formation
✔ 3 way tap with 3 years warranty
The Osmio Forum Chrome 3-Way (Tri-flow) Kitchen Tap makes a beautiful addition to any stylish kitchen. It replaces your old existing kitchen tap, with a traditional style yet modern look. The Osmio Forum can deliver pure refreshing filtered water when purchased with a water filter kit (see options and accessories section) or unfiltered hard water (with softened hot and cold) as you prefer.
The Osmio Forum Chrome 3-Way (Tri-flow) Kitchen Tap can be used with any undersink filter system and is very easy to install. This Tri-flow tap uses high flow valves so it may not be suitable for some low pressure gravity feed systems. If you have a combi-boiler or a mega-flow type high pressure hot water system, then this tap is highly suitable. Suitable for use with a water softener, the Forum comes with a ceramic lever turn valve for optimum pressure and temperature control, it also includes 3 flexible hoses for easy connection to your hot, cold and hard/filtered water.
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ Phosphate – for scale inhibition
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Watts 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
We recommend your flow rate not exceed 4 LPM for the best contact time and filtration.
|Model||Osmio Forum 3 Way Tap Ultra-Soft Filter Kit|
Includes 3 flexes for connection of hot , cold and filtered water line and full fitting kit and filter
Flexes have 3/8" female connections for connecting to existing pipework.
Total Height from base - 320 mm
Total Height from base top end of spout - 290 mm
Reach from middle of base - 185 mm
Column Thickness - 26 mm
Base Hole Diameter: 35 mm
Min Operating pressure 14.5 psi